User's Manual

CONTACTS
WORKING WITH CONTACTS
ENVOY™ TRANSCEIVER REFERENCE MANUAL 149
Working with contacts
Related links:
Entries for a contact on page 146
Call types on page 400
Navigating the menu structure on page 30
Entering text in a field on page 40
Selecting a value from a list on page 44
Selecting/deselecting a check box on page 45
Saving your changes on page 48
Group calls in a Codan Selcall HF network on page 419
Adding a contact
Contacts are used to pre-define the typical calls that you want to make to another
person. For each contact you can define a number of calls. Each call contains
information about:
• the call system that you want to use
• the type of call that you want to make to the contact
• the address or telephone number of the station at which this contact may be
located
NOTE: You can select some of the call information to prompt you for a choice
at the time that a call is made via the contact. The Prompt value is
available in these instances.
To add a contact:
 From the main menu, select (User Data), then (Contacts).
 Select (Contacts) or (Emergency Contacts), as required.
 Press (Add).