User's Manual

HF NETWORKS
ENTRIES FOR AN HF NETWORK
ENVOY™ TRANSCEIVER REFERENCE MANUAL 137
Privacy password
The Privacy Password entry applies to Codan Selcall and ALE/CALM HF
networks where the privacy mode is set to Group. The privacy password is defined
arbitrarily by the system administrator or user, and programmed into the transceiver.
The password can be up to 15 characters long.
NOTE: Changing this password must be managed across all transceivers using
this HF network.
Rx only
The Rx Only entry sets whether the address set for this HF network is used for
receiving calls only, or can be used for sending calls also.