User's Manual

SCAN TABLES
WORKING WITH SCAN TABLES
126 ENVOY™ TRANSCEIVER REFERENCE MANUAL
 Press (Options), scroll to Save, then press (Select).
 Press (Save) to save the information.
Related links:
Duplicating a channel in a scan table on page 126
Deleting a channel from a scan table
When you are adding or editing a scan table, you may want to delete channels that you
have added to the scan table. When you use the Delete option, the channel is only
removed from the scan table. It is not deleted from the transceiver. The channel that
you remove from the scan table will be available for adding back into this scan table
using the Add Chan option.
To delete a channel from a scan table:
 From the main menu, select (User Data), then (Scan Tables).
 Press or to scroll to the scan table from which you want to delete a channel,
then press OK.
 Press to move to the Scan Channels entry.
 Press to view the list of channels in the scan table.
 Press or to scroll to the channel that you want to delete from the scan table.
 Press (Options), scroll to Delete, then press (Select).
 Press (Options), scroll to Save, then press (Select).
 Press (Save) to save the information.
Related links:
Adding channels to a scan table on page 125
Clearing the channels from a scan table on page 127
Duplicating a channel in a scan table
If a channel has more than one allowed mode, you can select the mode that is scanned
when the channel is added to the scan table. If you want to have all allowed modes for
the channel scanned, duplicate the channel and select a different allowed mode.
Duplicating a channel and using the same mode doubles the length of time per scan
cycle that the channel is scanned. The transceiver automatically scans these two
instances of the same channel together.