User's Manual

CHANNELS
WORKING WITH CHANNELS
ENVOY™ TRANSCEIVER REFERENCE MANUAL 115
Working with channels
Related links:
Entries for a channel on page 113
Overview of scan tables on page 120
Available modes on page 263
Tx Power on page 204
Navigating the menu structure on page 30
Entering text in a field on page 40
Selecting a value from a list on page 44
Selecting/deselecting a check box on page 45
Saving your changes on page 48
Adding a channel in free tune on page 269
Adding a channel
Stations in an HF communication network use the information contained within a
channel to transmit and receive signals. Common channel information must be
programmed into transceivers that want to communicate. Typically, these channels
are grouped into scan tables, which are allocated to an HF network.
NOTE: If you are operating the transceiver in a country that has stringent
licensing regulations, you may not be permitted to add channels with
transmit frequencies.
NOTE: If the TxD option is installed in the transceiver, there are restrictions on
the frequencies that you can enter.
NOTE: If the TxP option is installed in the transceiver, you cannot add
channels.
NOTE: You may be permitted to add a channel in free tune.
To add a channel:
 From the main menu, select (User Data), then (Channels).
NOTE: You can also select (Add Channel) from the main menu to
directly enter a channel. This channel will be placed in the list of
channels in alphanumeric order.
 Do one of the following:
• If there are no channels programmed in the transceiver, press (Add).
• If there are some existing channels programmed in the transceiver, scroll
to the channel after which you want to add the new channel, press
(Options), scroll to Add, then press (Select) to add a channel.
 Enter the name that you want to use for the channel.