User's Manual

OPERATING THE TRANSCEIVER
FINDING AN RFU
110 E
NVOY™ TRANSCEIVER REFERENCE MANUAL
Finding an RFU
If your organisation has several Envoy™ Transceivers and control points connected
to a LAN via an Ethernet switch, you have to identify on the control point the RFU to
which you want to connect.
To find and connect to an RFU:
 From the main menu, select (General), then (Find RFU).
 Press or to scroll to the RFU to which you want to connect, then press
(Connect).
 If the RFU to which you want to connect is on a different subnet, do the
following:
• Press or to select the IP tab.
• Press to move to the Enter RFU Address entry.
• Enter the segments of the IP address.
You may need to press to move to the next segment.
• Press (Connect).