User's Manual

OPERATING THE TRANSCEIVER

UPGRADING THE TRANSCEIVER VIA A USB STICK

ENVOY™ TRANSCEIVER REFERENCE MANUAL 107

Upgrading the transceiver via a USB stick

Firmware packages, profiles from TPS, and secure keys may be loaded onto a USB

stick, providing a portable method of upgrading transceivers in the field. You can also

read a profile from a transceiver in the field. When the USB stick is connected to the

control point, a selection menu is shown for various activities, depending on the

values set in Settings > General > USB User Access.

To manage profiles, firmware, and secure keys:

 Connect your USB stick to the control point using a standard USB A (female)

to micro USB cable.

The USB stick is detected automatically.

 Press or to scroll to the activity that you want to perform from the

following:

• If you want to program a profile from the USB stick to the transceiver,

select Program Profile.

• If you want to read the profile from the transceiver to the USB stick, select

Read Profile.

• If you want to upgrade the transceiver with a firmware package from the

USB stick, select Upgrade Firmware.

• If you want to program secure keys to a transceiver that has an encryptor

module enabled, select Program Secure Keys.

 Do one of the following:

• Press or to scroll to the firmware package, profile, or key set file,

press (Options), scroll to Open, then press (Select).

• Press or to scroll to the folder in which you want to save the profile

from the transceiver, then press (Save).

 Press (Yes) to confirm that you want to complete the selected action.

 Perform more tasks with the USB stick as required.

 Press (Eject) when you have finished working with the USB stick.