User's Manual

OPERATING THE TRANSCEIVER
USING A CROSSPATCH
106 ENVOY™ TRANSCEIVER REFERENCE MANUAL
Changing the operating mode of the crosspatch
To change the operating mode of the crosspatch:
 If you are using a 2220 Handset or 2230 Desk Console, press 5.
 If you are using a 2221 Handset:
• From the main menu, select (Functions).
• Press or to scroll to the Next Crosspatch State function.
• Press (OK).
The crosspatch toggles between the following states:
•Off
•Active
• Standby
NOTE: If the status shows XP: Disconnected, the crosspatch may not
be connected, or is connected but not selected as a peripheral
device.