User's Manual

OPERATING THE TRANSCEIVER

REDUCING BACKGROUND NOISE WITH EASITALK™

92 E

NVOY™ TRANSCEIVER REFERENCE MANUAL

Reducing background noise with Easitalk™

The Easitalk™ feature enables you to reduce the level of background noise that is

present when you listen to a channel.

If Easitalk™ is active when the transceiver begins scanning, it is automatically

switched off. It is switched on again when scanning pauses or stops.

NOTE: Easitalk™ uses one of three DSP algorithms to reduce the background

noise. Depending on the conditions, you may need to change the

algorithm in Settings > Configuration > General.

To switch Easitalk™ on or off:

 Press

EASITALK.

The new status is shown in a pop-up, then you are returned to the screen that you

were on previously.