User's Manual

OPERATING THE TRANSCEIVER

CALLING

88 ENVOY™ TRANSCEIVER REFERENCE MANUAL

Related links:

RFDS Emergency call on page 406

Making a call to a contact

To make a call to a contact:

 Hold CALL.

 Press or to scroll to the contact who you want to call.

 If required, press or to scroll to the call that you want to make.

The call types that are available for the contact are set up in User Data >

Contacts.

NOTE: If only one call has been set up for the contact, you cannot select

a different call type at the time of the call.

 Press CALL.

 If prompted, press or to scroll to the channel that you want to use, then

press CALL.

A is shown next to the currently selected channel/mode.

To abort the call before it is answered, press PTT or SCAN.

There will be audible beeps or a pop-up message to indicate that the call has

been successful.