User's Manual

OPERATING THE TRANSCEIVER
CALLING
ENVOY™ TRANSCEIVER REFERENCE MANUAL 87
 If prompted, press or to scroll to the channel that you want to use, then
press CALL.
A is shown next to the currently selected channel/mode.
To abort the call before it is answered, press PTT or SCAN.
There will be audible beeps or a pop-up message to indicate that the call has
been successful.
Related links:
Emergency call on page 402
Entering text in a field on page 40
Group calls in a Codan Selcall HF network on page 419
My Position on page 233
Making a call from the Emergency key on page 90
Making an RFDS Emergency call
If you want to trigger an emergency alert tone at an RFDS station, make an RFDS
Emergency call.
To make an RFDS Emergency call:
 Press CALL.
The call type and address of the last call are shown at the top of the call screen.
 If you do not want to use the HF network shown at the top right of the screen:
•Press (Options).
• Scroll to HF Networks, then press (Select).
• Scroll to the HF network that you want to use, then press OK.
 Press CALL.
 If prompted, press or to scroll to the channel that you want to use, then
press CALL.
A is shown next to the currently selected channel/mode.