User's Manual

OPERATING THE TRANSCEIVER

CALLING

ENVOY™ TRANSCEIVER REFERENCE MANUAL 85

 If you do not want to use the HF network shown at the top right of the screen:

•Press (Options).

• Scroll to HF Networks, then press (Select).

• Scroll to the HF network that you want to use, then press OK.

 Press or to select the Get Status call type if it is not selected.

 Do one of the following:

• To repeat the call to the last address used, press CALL.

• To call a different station, enter the address, then press CALL.

• To repeat or return a call from the call log, press to scroll to the call,

then press CALL.

Figure 35: Available status types for a Get Status call in a Selcall or an

ALE/CALM HF network

 Press or to scroll to the status type that you want to use, then press OK.

 If you selected ?: Other as the status type, enter the text/command that you

want to send, press (Options), scroll to Save, then press (Select).

 If prompted, press or to scroll to the channel that you want to use, then

press CALL.

A is shown next to the currently selected channel/mode.

To abort the call before it is answered, press PTT or SCAN.

There will be audible beeps or a pop-up message to indicate that the call has

been successful.