User's Manual

OPERATING THE TRANSCEIVER
CALLING
ENVOY™ TRANSCEIVER REFERENCE MANUAL 83
Making a Get Position call
If you want to obtain the GPS position of a specific station that has valid GPS
information, make a Get Position call to that station. Get Position calls are
automatically answered by the receiving station so an operator is not required to
process the return call.
NOTE: You can make a Get Position call if the GPS Call option is installed in
your transceiver and the transceiver that you are calling. The success
of your Get Position call depends upon the value set in Calling >
General > Respond GPS of the transceiver you are calling and the
privacy mode of the HF network that you are using for the call.
To make a Get Position call:
 Press CALL.
The call type and address of the last call are shown at the top of the call screen.
 If you do not want to use the HF network shown at the top right of the screen:
•Press (Options).
• Scroll to HF Networks, then press (Select).
• Scroll to the HF network that you want to use, then press OK.
 Press or to select the Get Position call type if it is not selected.
 Do one of the following:
• To repeat the call to the last address used, press CALL.
• To call a different station, enter the address, then press CALL.
• To repeat or return a call from the call log, press to scroll to the call,
then press CALL.