User's Manual

OPERATING THE TRANSCEIVER

CALLING

82 ENVOY™ TRANSCEIVER REFERENCE MANUAL

 If you do not want to use the HF network shown at the top right of the screen:

• Press (Options).

• Scroll to HF Networks, then press (Select).

• Scroll to the HF network that you want to use, then press OK.

 Press or to select the Send Position call type if it is not selected.

 Do one of the following:

• To repeat the call to the last address used, press CALL.

• To call a different station, enter the address, then press CALL.

• To repeat or return a call from the call log, press to scroll to the call,

then press CALL.

 If prompted, press or to scroll to the channel that you want to use, then

press CALL.

A is shown next to the currently selected channel/mode.

To abort the call before it is answered, press PTT or SCAN.

There will be audible beeps or a pop-up message to indicate that the call has

been successful.