User's Manual

OPERATING THE TRANSCEIVER
CALLING
ENVOY™ TRANSCEIVER REFERENCE MANUAL 81
 If you are prompted to add a phone link, do the following:
• Enter the name that you want to use for the phone link.
• Press to move to the HF Network entry.
• Press or to select the HF network that you want to use.
• Press to move to the Selcall|ALE Address entry.
• Enter the address of the telephone station.
•Press (Save).
 If you are prompted to select a phone link, scroll to the phone link that you want
to use, then press CALL.
 If prompted, press or to scroll to the channel that you want to use, then
press CALL.
A is shown next to the currently selected channel/mode.
To abort the call before it is answered, press PTT or SCAN.
There will be audible beeps or a pop-up message to indicate that the call has
been successful.
Related links:
Phone call on page 406
Entering text in a field on page 40
Group calls in a Codan Selcall HF network on page 419
Making a Send Position call
If you want to send your GPS information to another station, make a Send Position
call.
NOTE: You can make a Send Position call if the GPS Call option is installed,
and your GPS information is valid. The transceiver sends GPS
information from either a connected and configured GPS receiver, or
from valid content in Settings > GPS > My Position.
To make a Send Position call:
 Press CALL.
The call type and address of the last call are shown at the top of the call screen.