User's Manual

OPERATING THE TRANSCEIVER
USING A CROSSPATCH
88 ENVOY™ TRANSCEIVER GETTING STARTED GUIDE
Using a crosspatch
Overview of the 3031 Crosspatch
The 3031 Crosspatch is a device that connects an HF
communication system with a VHF or UHF communication
system.
NOTE: For details on installing the crosspatch and its
operation, see the documentation provided with the
device.
NOTE: You must select the 3031 Crosspatch as the
peripheral device for the 15-way connector.
The operating mode of the crosspatch may be controlled directly by
the transceiver, or by using DTMF commands on a DTMF-capable
VHF/UHF transceiver.
The crosspatch may be active, on standby, or switched off. The
status of the crosspatch is shown in the title bar, and you can set the
status to be shown in one of the status areas.