User's Manual

OPERATING THE TRANSCEIVER
CALLING
ENVOY™ TRANSCEIVER GETTING STARTED GUIDE 77
 If prompted, press or to scroll to the channel that you
want to use, then press CALL.
A is shown next to the currently selected channel/mode.
To abort the call before it is answered, press PTT or SCAN.
There will be audible beeps or a pop-up message to indicate
that the call has been successful.
Making a call from the Call History
The Envoy™ Transceiver stores information on the calls that you
send and receive. The detailed call history is accessed by
holding CALL, then pressing to scroll to the Call History tab.
NOTE: A filtered call log is available in the call screen. This
log contains only the latest instance of a call to a
specific station.
To make a call from the Call History:
 Hold CALL.
 Press or to select the Call History tab.
 Press or to scroll to the call that you want to return or
repeat, then press CALL.
 If you want to view the details of the call, press
(Options), scroll to Details, then press (Select).
Press (Close) to exit viewing the details.