User's Manual

OPERATING THE TRANSCEIVER
CALLING
76 ENVOY™ TRANSCEIVER GETTING STARTED GUIDE
• Press (Options), scroll to OK, then
press (Select).
 If prompted, press or to scroll to the channel that you
want to use, then press CALL.
A is shown next to the currently selected channel/mode.
To abort the call before it is answered, press PTT or SCAN.
There will be audible beeps or a pop-up message to indicate
that the call has been successful.
Making a call to a contact
To make a call to a contact:
 Hold CALL.
 Press or to scroll to the contact who you want to call.
 If required, press or to scroll to the call that you want
to make.
The call types that are available for the contact are set up in
User Data > Contacts.
NOTE: If only one call has been set up for the
contact, you cannot select a different call type
at the time of the call.
 Press CALL.