User's Manual

OPERATING THE TRANSCEIVER
CALLING
72 ENVOY™ TRANSCEIVER GETTING STARTED GUIDE
 If you do not want to use the HF network shown at the top
right of the screen:
• Press (Options).
• Scroll to HF Networks, then press (Select).
• Scroll to the HF network that you want to use, then
press OK.
 Press or to select the Selective call type if it is not
selected.
 Do one of the following:
• To repeat the call to the last address used,
press CALL.
• To call a different station, enter the address, then
press CALL.
• To repeat or return a call from the call log, press
to scroll to the call, then press CALL.
 If prompted, press or to scroll to the channel that you
want to use, then press CALL.
A is shown next to the currently selected channel/mode.
To abort the call before it is answered, press PTT or SCAN.
There will be audible beeps or a pop-up message to indicate
that the call has been successful.