User's Manual

OPERATING THE TRANSCEIVER
THE CHANNEL SCREEN
62 ENVOY™ TRANSCEIVER GETTING STARTED GUIDE
Figure 22: Channel screen
If the transmit and receive frequencies are the same, the frequency
is only shown on the right side of the screen. The Rx/Tx indicator
shows whether the transceiver is receiving (green) or transmitting
(red). The more bars that are shown, the higher the signal strength.
Your transceiver may have the option of selecting high, medium,
or low power. Hi, Med, or Lo is shown respectively to the right of
the signal strength indicator.
While a call is being established, the transceiver shows that calling
activity is in progress by flashing in place of the scan indicator.
Once a call is established, these indicators are replaced with an icon
that represents the type of call being sent or received.
When the transceiver is scanning, the channel screen is replaced by
the scanning screen.
channel name
Tx/Rx frequency
status areas
menu bar
title bar
mode
mute type
indicator
(highlighted
when mute is on)
call type
icon
Tx power
setting
signal
strength
indicator
Rx/Tx
indicator
left
software
key
right
software
key
volume
indicator