User's Manual

USING THE WIZARD

ENVOY™ TRANSCEIVER GETTING STARTED GUIDE 29

Selecting an antenna

Each type of antenna has a specific requirement for tuning, and the

transceiver uses a different protocol for each one. You must select

the type of antenna that is used in your station so that the

transceiver knows how to tune the antenna. Some antennas, such as

broadband antennas, do not require tuning.

To select an antenna:

 Do one of the following:

• Press or to scroll to the antenna type that you

want to use, then press OK.

•Press (Close), then continue from Selecting a

peripheral device on page 30.

 Press (Save) to save the information.

 Do one of the following:

• If you want to connect an accessory to the 15-way

port of the RFU, press (Yes), then continue

from Selecting a peripheral device on page 30.

• If you do not want to connect an accessory,

press (No), then press OK to close the wizard.