Manualshelf

User's Manual

ManualsBrandsCodan ManualsElectronics2210 HF Radio System
31323334353637383940
USING THE WIZARD
USING THE WIZARD
28 ENVOY™ TRANSCEIVER GETTING STARTED GUIDE
Completing the contact
To finish entering the information required for the contact:
Press to move to the Call Description entry.
By default, the call type is entered as the call description.
Enter the description that you want to use for this call.
Press (Save) to save the information.
If you want to add another call for the contact, press
(Yes), then repeat the steps for adding a call.
If you do not want to add another call, press (No).
If you want to add another contact, press (Yes), then
repeat the steps for adding a contact.
If you do not want to add another contact, press (No).
Do one of the following:
• If you want to select an antenna, continue from
Selecting an antenna on page 29.
• If you do not want to select an antenna, continue
from Selecting a peripheral device on page 30.