User's Manual

USING THE WIZARD

ENVOY™ TRANSCEIVER GETTING STARTED GUIDE 21

 Press (Save) to add these channel selections.

 Continue from Entering a self address on page 21.

Entering a self address

A self address is used by other stations to call your station. For

example, if the self address of your station is 1234, operators at

other stations enter the address 1234 when they want to make a call

to you.

To enter a self address:

 Enter the address that you want to use.

You can enter up to six digits.

NOTE: Addresses ending in 99 and 00 have a special

function in Selcall HF networks.

 Press (Save) to save the information.

NOTE: The wizard automatically allocates this self

address to the default HF networks: Selcall

and CALM (if FED-STD-1045 ALE or

MIL-STD-188-141B ALE option is

installed).

 Do one of the following:

• If you want to add a contact, press (Yes), then

continue from Adding a contact on page 22.

• If you do not want to add a contact, press (No),

then continue from Selecting an antenna on page 29.