User's Manual

USING THE WIZARD

18 ENVOY™ TRANSCEIVER GETTING STARTED GUIDE

 Press or to scroll to the value that you want to set, then

press to move to the next item.

 Repeat this for the day/month and year, as required.

 Press (Save) to save the local date.

 Press to move to the Clock entry.

 Press or to select the type of clock that you want to use.

 Press to move to the Time Format entry.

 Press or to select the format that you want to use.

 Press to move to the Date Format entry.

 Press or to select the format that you want to use.

 If you want to review the information that you have entered,

press or to move through the entries.

 Press (Save) to save the information.

If you have not changed any of the time and date

information, press (Close).

Setting the location of the desk console

NOTE: This step in the wizard is shown if your control point

is a desk console.

To set the location of the desk console:

 Press or to select the value that you want to use from

the following:

• If the desk console is connected to the transceiver

using cable 08-07205-00x, select Local.

• If the desk console is connected to the transceiver

using an Ethernet cable (08-07215-001), select

Remote.

 Press (Save) to save the information.