User's Manual

COMPLIANCE
EMC AND SAFETY NOTICES
128 ENVOY™ TRANSCEIVER GETTING STARTED GUIDE
EMC
CAUTION: If it is necessary to remove the covers at any stage,
they must be refitted correctly before using the
equipment.
To ensure that compliance with the EMC Directive is maintained.
 Use standard shielded cables supplied from Codan (where
applicable).
 Ensure the covers for the equipment are fitted correctly.
 Cover unused connectors on the RFU with the protective
caps supplied to prevent electrostatic discharge passing
through your transceiver.
Electrical safety
To ensure compliance with the European Low Voltage Directive is
maintained, you must install and use the Envoy™ Transceiver in
accordance with the instructions in the Envoy™ Transceiver
Getting Started Guide and the Envoy™ Transceiver Reference
Manual.
When using equipment that is connected directly to the AC mains
these precautions must be followed and checked before applying an
AC mains supply to the unit.
To ensure electrical safety:
 Use the standard AC mains cable supplied.
 Ensure the covers for the equipment are fitted correctly.
CAUTION: If it is necessary for a qualified electronics technician
to remove the covers during servicing, they must be
refitted correctly before using the equipment.
WARNING: A protective earth connection must be included in
the mains wiring to the 3020 Transceiver Supply.