User's Manual

INSTALLING THE TRANSCEIVER
OVERVIEW OF FIXED STATIONS
118 ENVOY™ TRANSCEIVER GETTING STARTED GUIDE
 Connect the plug at the end of the cable to the socket at the
end of the cable lead from the RFU, then secure the
locking ring tightly into position.
 Connect the plug at the opposite end of the cable to the
socket located at the base of the antenna, then secure the
locking ring tightly into position.
Connecting an automatic tuner to the RFU and antenna
(optional)
NOTE: You may need to install a tuner to improve the
efficiency of the antenna in your fixed station (see
the reference material on the enclosed CD).
NOTE: The tuner used in most applications has connectors at
the end of the cables attached to the tuner, as
described below, however, you may have a tuner that
has sockets on the connector panel of the tuner.
To connect the tuner to the RFU:
 Connect the plug at the end of the coaxial cable from the
tuner to the socket at the end of the cable lead from the
RFU, then secure the locking ring tightly into position.
 Connect the plug at the end of the control cable from the
tuner to the socket at the end of the cable lead from the
RFU, then secure the locking ring tightly into position.
 Connect the antenna to the antenna connector on the tuner,
then secure it tightly into position.