User's Manual

INSTALLING THE TRANSCEIVER

OVERVIEW OF FIXED STATIONS

116 ENVOY™ TRANSCEIVER GETTING STARTED GUIDE

Cables in a fixed station

Mounting a fixed Envoy™ station

A fixed Envoy™ station may be mounted using a 2230 Desk

Console. For general guidance on suitable locations for equipment

and installing the fixed station see the reference material on the

enclosed CD.

RFU and transceiver supply

The RFU and the transceiver supply are self-contained and are

usually stacked loosely. If you want to mount the RFU and/or the

transceiver supply, contact your Codan representative to obtain a

rack-mounting unit or the appropriate mounting cradles.

CAUTION: If you are mounting an RFU in a cradle, do not fit

rubber feet to the bottom of the RFU.

NOTE: If you are transferring a mobile station to a fixed

station, and you are not mounting the RFU in a

cradle, rubber feet can be fitted to the bottom of the

RFU. The rubber feet are available from Codan

(Codan part number 30-11208-000).

Table 6: Cables for a typical fixed Envoy™ station

Cable Symbol Part number

Cable between RFU and 2230 Desk Console 08-07205-xxx

Handset and speaker connector

and cable

(optional)

08-06022-001

Coaxial cable between RFU and antenna

08-01503-006

1. The part number for the cable corresponds to a standard 6 m cable.

2. The part number for the cable corresponds to a 30 m coaxial cable. The cable is also available in a

number of shorter lengths.