User's Manual

ENVOY™ TRANSCEIVER GETTING STARTED GUIDE 1

Introduction

Congratulations on choosing a Codan Envoy™ Transceiver to

meet your HF communications needs. You can expect many years

of reliable high performance, and if ever assistance is required,

Codan’s world-class after-sales support team is ready to help.

Please read this guide thoroughly and retain it for future reference.

There is an index at the end of this guide to assist you in finding

information.

Overview of this guide

This guide provides instructions on how to connect up your

Envoy™ Transceiver, and how to perform basic setup and

operating tasks. It assumes that you have limited knowledge of HF

communication and of using an HF transceiver.

Detailed information for setting up a particular system and

extensive reference material are provided on the CD at the back of

this guide.

This guide contains the following sections:

Introduction—provides an overview of the components of the

transceiver system

Using the wizard—describes the steps in the wizard that are used

to set up the transceiver

Navigating the menu structure—describes how to navigate the

menu structure and perform basic selection and editing functions

Structure of information—describes the building blocks of

information in the transceiver

Operating the transceiver—describes how to operate the

transceiver and how to make calls