User's Manual

CONTACTS
ADDING A CONTACT
ENVOY™ TRANSCEIVER GETTING STARTED GUIDE 95
 Enter the name that you want to use for the contact, then
press (Add Call).
The HF Network entry is highlighted.
The HF network defines the call system and self address that
is used by your station when the call is made. For example,
if you want to select a channel for the call, use a Selcall HF
network. If you want the transceiver to automatically select
a channel for the call, use an ALE/CALM HF network.
 Press or to select the HF network that you want to use.
 Press to move to the Call Type entry.
 Press or to select the call type that you want to use.
NOTE: The call type that you select affects
information that you can enter for the
remainder of this call.