User's Manual

CONTACTS
ADDING A CONTACT
94 ENVOY™ TRANSCEIVER GETTING STARTED GUIDE
Adding a contact
Contacts are used to pre-define the typical calls that you want to
make to another person. For each contact you can define a number
of calls. Each call contains information about:
• the call system that you want to use
• the type of call that you want to make to the contact
• the address or telephone number of the station at which this
contact may be located
NOTE: You can select some of the call information to
prompt you for a choice at the time that a call is made
via the contact. The Prompt value is available in
these instances.
To add a contact:
 From the main menu, select (User Data), then
(Contacts).
 Select (Contacts) or (Emergency Contacts), as
required.
 Press (Add).