User's Manual

DATA OPTIONS
INTERNAL DATA MODEM (2400 BIT/S)
E
NVOY™ TRANSCEIVER REFERENCE MANUAL 317
 Record the value of the COM port used for the 2400 bit/s Internal Modem
in the Connected Services frame.
 Exit the Virtual COM PC Application.
Setting the COM port in UUPlus
The COM port used by UUPlus to communicate with the modem must be the same as
the COM port set in the Virtual COM PC Application.
To set up the COM port in UUPlus:
 Launch UUPlus Server/Client.
 Click Setup, then select the Modem Settings tab.
 Click on the drop arrow in the Com Port field, then select the COM port used
by VCOM.
Related links:
Viewing COM port setting in VCOM on page 316
Making a data call
Data calls are made in the background when you send an email via UUPlus (or
similar), or when transferring a file between terminal sessions.
NOTE: For information on sending an email via UUPlus see the
documentation provided with the software.
To make a data call:
 Compose your email in UUPlus (or similar).
 Do one of the following:
• If you want to make the call using a Selcall HF network, switch off
scanning on the transceiver’s control point, then scroll to the channel that
you want to use for the call.
• If you want to make the call using an ALE/CALM HF network, switch on
scanning on the transceiver’s control point.
NOTE: If a channel is common to both HF networks, the type of HF
network used for the call is determined by the scanning status
when the call is made.
 In UUPlus, press Send.