User's Manual

KEYS AND MACROS

MACROS

ENVOY™ TRANSCEIVER REFERENCE MANUAL 249

Macros

If you want to automate some of the tasks you perform with the transceiver you can

create hot keys on the handset and desk console to perform the tasks for you. Each task

is stored in a macro as a series of steps, and the macro is assigned to a hot key.

Performing the tasks is then as simple as pressing or holding the hot key.

The transceiver is supplied with a set of standard hot keys. These functions are

labelled on the corresponding hot key in

BLUE text. The descriptions of these

standard hot keys are included in Table 9. The hot keys to which these macros are

assigned cannot be moved at user level. The user can create hot keys when in

advanced view.

A macro can be assigned to the alphanumeric or keys. When the user interface is in

character-entry mode, macros assigned to an alphanumeric key cannot be used, as the

key is used to enter characters. If you want to be able to use a macro at any time, you

should assign the macro to the key.