User's Manual

ENCRYPTION

SETTING UP ENCRYPTION

288 ENVOY™ TRANSCEIVER REFERENCE MANUAL

Setting the secure state of all encryptors at power up

You can set the state of the available encryptors when the transceiver is powered up.

To set the secure state of the encryptors at power up:

 From the main menu, select (Settings), then (Security).

 Press or to scroll to the Secure Start State entry.

 Press or to select the value that you want to use from the following:

• To return to the secure state that the encryptor was in prior to the

transceiver being switched off, select Leave as is.

• To always enter secure mode at power up, select Secure on.

• To remain clear at power up, select Secure off.

 Press (Save) to save the information.

 Press (Close).