User's Manual

ENCRYPTION
SETTING UP ENCRYPTION
ENVOY™ TRANSCEIVER REFERENCE MANUAL 285
 Press (Save) to save the information.
 Press (Close).
Related links:
Secure User Access on page 237
Enabling encryptor selection
If you want the user to be able to select the type of encryptor at the time of use, enable
this feature. When enabled, the user will be able to select the encryptor by
holding
SEC, or via Functions > Secure Info (2221 only).
To enable encryptor selection:
 From the main menu, select (Settings), then (Security).
 Press or to scroll to the General Options entry.
 Press .
 Press or to scroll to the Allow user to select encryptor type value,
then press OK to select the check box.
When the check box is selected, the item is enabled. When the check box is
clear, the item is disabled.
 Press (Save) to save the information.
 Press (Close).