User's Manual

CALL TYPES AND FEATURES

CALL TYPES

404 ENVOY™ TRANSCEIVER REFERENCE MANUAL

Table 48: Information retrieved in a Codan Diagnostic Get Status call made

to a Codan HF transceiver

Information received Description

TXnn.n Battery voltage in transmit

S1=nnn Signal strength of received call (dBµV)

S2=nnn Signal strength 2 sec after call was received (dBµV)

SWRn.n SWR of the antenna

Pnnn Power output of the transmitter (W)

Tnn Temperature (°C)

Table 49: Information retrieved in a Codan Diagnostic Get Status call made

to a Codan 9323 or 9360 transceiver

Information received Description

RX=nn.nV Battery voltage in receive

TX=nn.nV Battery voltage in transmit

S1=nnnµV Signal strength of received call (dBµV)

S2=nnnµV Signal strength 2 sec after call was received (dBµV)

GAIN=nnn RF gain on or off

SWR=n.n SWR of the antenna

PWR=nnnW Power output of the transmitter (W)

Table 50: Information retrieved in an open Diagnostic Get Status call

Information received Description

RXnn.n Battery voltage in receive

TXnn.n Battery voltage in transmit

S1=nn Signal strength of received call

SWR=n.n SWR of the antenna