User's Manual

KEYS AND MACROS
WORKING WITH MACROS
256 ENVOY™ TRANSCEIVER REFERENCE MANUAL
 Press to move to the Operation entry.
 Press or to scroll through the following values:
• To access the entry for editing at the time of the macro, select Open.
• To set a value in the entry at the time of the macro, select Set.
• To toggle the state of the entry at the time of the macro, select Toggle.
 If you selected Set for the operation, do the following:
• Press to move to the Value entry.
• Select the value that you want to use.
 Press to move to the Delay entry.
 Enter the delay (in msec) that you want between the macro steps.
 Press (Save) to save the information.
 Continue from Completing the macro on page 256.
Completing the macro
To complete the macro:
 If you want to add another macro step, press (Options), scroll to Add
Step, then press (Select) to add a step.
NOTE: When more than one macro step exists for the macro, you can
move the steps to the order in which you want them performed.
 Press (Options), scroll to Save, then press (Select).