User's Manual

INSTALLATION
MOBILE STATIONS
354 ENVOY™ TRANSCEIVER REFERENCE MANUAL
• ensures correct connection and operation
• provides easy access for maintenance
WARNING: The units of the mobile station should only be mounted on structural
components of the vehicle body and not to dress panels. The areas used
for mounting may require reinforcement.
Mounting positions that are recommended in a mobile installation include:
• the transmission hump
• in place of the glove box
• behind the seat
• under the dashboard (if safe)
WARNING: Do not mount the transceiver on a cargo barrier as this may void the
vehicle manufacturer’s warranty.
The mounting position must ensure sufficient cable length is provided to enable the
removal of the equipment from the cradle with the various cables connected.
Related links:
Specifications on page 341
Positioning the control points
The control points and speaker must be in a position that:
• suits the operator
• is near the operating position
• is clear of other controls
• is not dangerous to the driver or passengers
• considers cable routing
Installing the cables
WARNING: Do not cut the control, coaxial or speaker cable. If the cables are too
long, gather the excess neatly and secure it out of the way.
CAUTION: Large magnetic fields can be generated along the power cable during
transmission and these fields may be coupled into the control cabling.
Failure to keep these cables separated causes distortion of the
transmitted signal.