Reference Manual
Table Of Contents
- 10 The NETList
- 11 The Phone Link List
- 12 The Address List
- 13 Making and receiving calls
- Calls you can make and receive
- Making a call
- Listen Before Transmit Mode
- Testing the quality of a channel in a Codan Selcall network
- Replacing LQA information for all channels in an ALE/CALM network
- Making a manual sounding operation in an ALE/CALM network
- Selecting the best channel in an ALE/CALM network
- Other ways to make calls
- Calling methods
- The Calls Out Log
- Receiving a call
- The call alert
- The incoming call screen
- Error reporting in a received AMD message
- The Calls In Log
- Figure37: The Calls In Log showing a Selective call received
- Figure38: The Calls In Log showing a Message call received
- Figure39: The Calls In Log showing a Get Status call received
- Figure40: The Calls In Log showing a NET call received
- Displaying an entry in the Calls In Log
- Returning a call from the Calls In Log
- Deleting an entry from the Calls In Log
- Detecting transmissions from other stations
- 14 The Control List
- Entries in the Control List
- ALE entries
- Auto Resume entries
- Devices entry
- Figure42: The Devices entry in the Control List
- Selecting a built-in test
- Displaying the electronic serial number of a device
- Installing an option in the transceiver
- Displaying the firmware version of your transceiver
- Displaying the product name of a device
- Renaming your transceiver
- Accessing lists from the Devices entry
- GPS Screen entry
- LQA Screen entry
- Messages entry
- 15 The Keypad List
- 16 The Mode List
- 17 Using the transceiver in free tune and Amateur Mode
- 18 Hot keys
- About hot keys
- Full-time and part-time hot keys
- Assigning several macros to one key
- Automating several tasks with one macro
- Troubleshooting macros
- Storing macros
- Ideas for creating macros
- Creating a macro and assigning it to a hot key
- Copying a macro
- Moving a macro
- Renaming a macro
- Deleting a macro
- Creating a macro to perform two or more tasks
- Special macros
- 19 Operating the transceiver from a computer
- About CICS
- Using CICS
- Setting up CICS
- Terms used in CICS and the 2110SSB Transceiver
- CICS commands
- Table33: CICS commands and their functions
- alebeacon command
- alecall command
- aletelcall command
- amd command
- beacon command
- call command
- chan command
- echo command
- freq command
- gpsbeacon command
- gpsposition command
- hangup command
- help command
- lbt command
- link command
- lock command
- lqa command
- mode command
- pagecall command
- prompt command
- ptt command
- scan command
- secure command
- selbeacon command
- selcall command
- selfid command
- set command
- sideband command
- sound command
- statusack command
- statuscall command
- statustime command
- telcall command
- ver command
- Summary of command syntax
- CICS response messages
- CICS error messages
- 20 Connectors
- 21 System messages
- 22 Accessories and hardware options
- 23 Specifications
Making and receiving calls
170 2110 SSB Transceiver Reference Manual
Send Position call
If you want to send your GPS information to another station, make a Send Position call.
You can only make Send Position calls if the GPS option has been installed in your
transceiver.
If you have the FED-STD-1045 ALE/CALM option installed, you can use the ALL
address syntax with the Send Position call type to send a call to a group of stations using
an ALE/CALM network. If you have the MIL-STD-188-141B ALE option installed, you
can use the ALL, ANY, Group Selective, NET, and Wildcard address syntaxes with the
Send Position call type to send a call to a group of stations using an ALE/CALM
network. The transceiver will automatically determine the call icon from the address
syntax that you enter in the address.
For more information on the ALE address syntaxes you can use with a Send Position call
see page 164, Summary of the special ALE address syntaxes.
Send Position calls are automatically answered by any receiving stations so an operator
is not required to take any action. If you send an ALE call using the Send Position call
type, the link terminates immediately after the GPS position is sent. GPS positions you
send are stored in the Calls Out Log (see page 187, The Calls Out Log).
Group calls in a Codan Selcall network
Emergency, Message and Selective calls can be made to a group of stations
simultaneously by using a Codan Selcall network and a group address.
A group selcall address is an address that ends in two or more zeros. For example, to call
all stations with addresses that range from 1201 to 1299, you would enter 1200 as the
address. To call all stations with addresses that range from 150001 to 159999, you would
enter 150000 as the address.
NOTE
You can use any of the characters in the basic 38 ASCII subset (A–Z, 0–9,
@ and ?) for the address.
NOTE
You can replace the zeros at the end of the address with dots or question
marks, for example, 12.. or 12?? instead of 1200.