Reference Manual

The Address List
2110 SSB Transceiver Reference Manual 151
Calling several stations simultaneously
If you want to call several stations simultaneously, set up the Emergency 1 entry in the
Address List to make a call.
In an ALE/CALM network, calls to a group of stations can be made using ALL, ANY,
Group Selective, NET, and Wildcard address syntaxes through the Emergency, Message,
Phone, Selective, and Send Position call types if you have the MIL-STD-188-141B ALE
option installed. You can also send a message as part of the ALE call.
For more information on the special ALE address syntax see page 147, CallType–
Address.
In a Codan Selcall network, calls to a group of stations can be made using a group selcall
address through the Emergency, Message, and Selective call types. A group address is an
address that ends in two or more zeros. For example, to call all stations with addresses
that range from 1201 to 1299, you would enter 1200 as the address. To call all stations
with addresses that range from 150001 to 159999, you would enter 150000 as the
address.
To set up the key to call several stations simultaneously:
1 Press VIEW until the Address List is displayed.
1 Press .
1 Scroll to Emergency 1, then press .
1 Enter the details of the call you want to make (for help see page 155, Editing an
entry in the Address List).
1 Enter the group selcall address in the CallType–Address setting.
NOTE
If the Emergency 1 entry has been deleted, create a new entry and
name it Emergency 1 (for help see page 154, Creating an entry in the
Address List).