Reference Manual
Table Of Contents
- 10 The NETList
- 11 The Phone Link List
- 12 The Address List
- 13 Making and receiving calls
- Calls you can make and receive
- Making a call
- Listen Before Transmit Mode
- Testing the quality of a channel in a Codan Selcall network
- Replacing LQA information for all channels in an ALE/CALM network
- Making a manual sounding operation in an ALE/CALM network
- Selecting the best channel in an ALE/CALM network
- Other ways to make calls
- Calling methods
- The Calls Out Log
- Receiving a call
- The call alert
- The incoming call screen
- Error reporting in a received AMD message
- The Calls In Log
- Figure37: The Calls In Log showing a Selective call received
- Figure38: The Calls In Log showing a Message call received
- Figure39: The Calls In Log showing a Get Status call received
- Figure40: The Calls In Log showing a NET call received
- Displaying an entry in the Calls In Log
- Returning a call from the Calls In Log
- Deleting an entry from the Calls In Log
- Detecting transmissions from other stations
- 14 The Control List
- Entries in the Control List
- ALE entries
- Auto Resume entries
- Devices entry
- Figure42: The Devices entry in the Control List
- Selecting a built-in test
- Displaying the electronic serial number of a device
- Installing an option in the transceiver
- Displaying the firmware version of your transceiver
- Displaying the product name of a device
- Renaming your transceiver
- Accessing lists from the Devices entry
- GPS Screen entry
- LQA Screen entry
- Messages entry
- 15 The Keypad List
- 16 The Mode List
- 17 Using the transceiver in free tune and Amateur Mode
- 18 Hot keys
- About hot keys
- Full-time and part-time hot keys
- Assigning several macros to one key
- Automating several tasks with one macro
- Troubleshooting macros
- Storing macros
- Ideas for creating macros
- Creating a macro and assigning it to a hot key
- Copying a macro
- Moving a macro
- Renaming a macro
- Deleting a macro
- Creating a macro to perform two or more tasks
- Special macros
- 19 Operating the transceiver from a computer
- About CICS
- Using CICS
- Setting up CICS
- Terms used in CICS and the 2110SSB Transceiver
- CICS commands
- Table33: CICS commands and their functions
- alebeacon command
- alecall command
- aletelcall command
- amd command
- beacon command
- call command
- chan command
- echo command
- freq command
- gpsbeacon command
- gpsposition command
- hangup command
- help command
- lbt command
- link command
- lock command
- lqa command
- mode command
- pagecall command
- prompt command
- ptt command
- scan command
- secure command
- selbeacon command
- selcall command
- selfid command
- set command
- sideband command
- sound command
- statusack command
- statuscall command
- statustime command
- telcall command
- ver command
- Summary of command syntax
- CICS response messages
- CICS error messages
- 20 Connectors
- 21 System messages
- 22 Accessories and hardware options
- 23 Specifications
The Address List
148 2110 SSB Transceiver Reference Manual
Message
The Message setting in the Address List entry is available when you select Message as
the call type. It may be used for requesting configuration and diagnostic information
from other transceivers in your network, or you can pre-store a standard message that is
sent each time you make a call using this entry in the Address List. For example, you
may need to notify your base station that you are shutting down for the day. Therefore,
you would create an entry in your Address List to send a Message call (call type) to your
base station (address) containing the message ‘Shut down’. The Privacy Mode and
Privacy Password in the network used for the call specify how the data is transmitted, for
example, plain or encrypted (see page 124, Privacy Mode).
Messages are sent using a Codan protocol in Codan Selcall networks, and as an AMD
message in ALE/CALM networks.
A Message call closes the link as soon as the message has been sent.
Phone Link
The Phone Link setting in an Address List entry is available when you select Phone as
the call type. It identifies the phone link station through which the call is made.
@A? a double selective wildcard ANY call to listening stations
that have an ‘A’ as the second to last character of their self
address (‘A’ may be any specified upper-case letter or
number) and any upper-case letter or number as the last
character, for example, USAM, 19MA0, ENA9, 3DAZ (see
page 160, ANY address syntax)
ABC,JK3MN,PQR
(example only)
a Group Selective call to the stations specifically addressed
(see page 161, Group Selective address syntax)
NET address a NET call to all stations with that NET programmed in the
NET List (see page 162, NET address syntax)
??? a Wildcard call to listening stations that have a self address
matching the length of the sent address and with any upper-
case letter or number as each of the characters, for example,
SAM, NAA, 234, 3AZ (see page 163, Wildcard address
syntax)
A?B? (example only) a selective Wildcard call to listening stations that have a self
address matching the length of the sent address with ‘A’ and
‘B’ as the first and third characters respectively, and with any
upper-case letter or number in the second and last characters,
in this case (‘A’ and ‘B’ may be any specified upper-case
letter or number), for example, A2BM, ADB1, AZBE, A3B8
(see page 163, Wildcard address syntax)
If you enter the ALE
address syntax...
The transceiver will send...