Reference Manual
Table Of Contents
- 10 The NETList
- 11 The Phone Link List
- 12 The Address List
- 13 Making and receiving calls
- Calls you can make and receive
- Making a call
- Listen Before Transmit Mode
- Testing the quality of a channel in a Codan Selcall network
- Replacing LQA information for all channels in an ALE/CALM network
- Making a manual sounding operation in an ALE/CALM network
- Selecting the best channel in an ALE/CALM network
- Other ways to make calls
- Calling methods
- The Calls Out Log
- Receiving a call
- The call alert
- The incoming call screen
- Error reporting in a received AMD message
- The Calls In Log
- Figure37: The Calls In Log showing a Selective call received
- Figure38: The Calls In Log showing a Message call received
- Figure39: The Calls In Log showing a Get Status call received
- Figure40: The Calls In Log showing a NET call received
- Displaying an entry in the Calls In Log
- Returning a call from the Calls In Log
- Deleting an entry from the Calls In Log
- Detecting transmissions from other stations
- 14 The Control List
- Entries in the Control List
- ALE entries
- Auto Resume entries
- Devices entry
- Figure42: The Devices entry in the Control List
- Selecting a built-in test
- Displaying the electronic serial number of a device
- Installing an option in the transceiver
- Displaying the firmware version of your transceiver
- Displaying the product name of a device
- Renaming your transceiver
- Accessing lists from the Devices entry
- GPS Screen entry
- LQA Screen entry
- Messages entry
- 15 The Keypad List
- 16 The Mode List
- 17 Using the transceiver in free tune and Amateur Mode
- 18 Hot keys
- About hot keys
- Full-time and part-time hot keys
- Assigning several macros to one key
- Automating several tasks with one macro
- Troubleshooting macros
- Storing macros
- Ideas for creating macros
- Creating a macro and assigning it to a hot key
- Copying a macro
- Moving a macro
- Renaming a macro
- Deleting a macro
- Creating a macro to perform two or more tasks
- Special macros
- 19 Operating the transceiver from a computer
- About CICS
- Using CICS
- Setting up CICS
- Terms used in CICS and the 2110SSB Transceiver
- CICS commands
- Table33: CICS commands and their functions
- alebeacon command
- alecall command
- aletelcall command
- amd command
- beacon command
- call command
- chan command
- echo command
- freq command
- gpsbeacon command
- gpsposition command
- hangup command
- help command
- lbt command
- link command
- lock command
- lqa command
- mode command
- pagecall command
- prompt command
- ptt command
- scan command
- secure command
- selbeacon command
- selcall command
- selfid command
- set command
- sideband command
- sound command
- statusack command
- statuscall command
- statustime command
- telcall command
- ver command
- Summary of command syntax
- CICS response messages
- CICS error messages
- 20 Connectors
- 21 System messages
- 22 Accessories and hardware options
- 23 Specifications
Operating the transceiver from a computer
260 2110 SSB Transceiver Reference Manual
CICS commands
This section covers the functions and syntax of the CICS commands. In this section:
• the function of each command is summarised in Table 33
• the syntax and function of each command is summarised in Table 35 on page 287
Table 33: CICS commands and their functions
Commands Function See...
alebeacon Makes a Channel Test call to addressed stations using an
ALE/CALM network.
page 261
alecall Makes a call to addressed stations using an ALE/CALM network. page 262
aletelcall Makes a Phone call to addressed stations using an ALE/CALM
network.
page 263
amd Sends a message on the existing ALE link. page 264
beacon Makes a Channel Test call to addressed stations using an
ALE/CALM or a Codan Selcall network.
page 264
call Makes a call on the current channel using an ALE/CALM or a
Codan Selcall network.
page 265
chan Controls the selection of channels in the transceiver. page 266
echo Controls the echo state of the transceiver. page 266
freq Displays the frequency of the current channel, or selects the
channel by the frequency specified.
page 267
gpsbeacon Makes a Get Position call to an addressed station using an
ALE/CALM or a Codan Selcall network.
page 268
gpsposition Makes a Send Position call to addressed stations using an
ALE/CALM or a Codan Selcall network.
page 269
hangup Closes an active link between your transceiver and the station that
you are calling.
page 269
help Displays the help available in CICS. page 270
lbt Displays the global LBT Mode or monitors the current channel for
the presence of data or voice.
page 270
link Displays the current link status. page 270
lock Controls the lock status of the transceiver. page 271
lqa Controls the display of LQA information on the current or last
established link since powerup of the transceiver.
page 272
mode Controls the mode settings of the channels in the transceiver. page 273
pagecall Makes a Message call to addressed stations using an ALE/CALM
or a Codan Selcall network.
page 274