Reference Manual

The Phone Link List
2110 SSB Transceiver Reference Manual 143
Programming the Phone Link List
Creating a phone link
To create a phone link:
1 Press until Main Menu is displayed.
1 Scroll to Phone Link, then press .
1 Use the List Manager to create an entry (for help see page 97, Creating an entry in a
list and page 52, Entering and editing text).
1 Enter the setting information provided in the following table as required, then
press to enter the information.
The new phone link is created and the List Manager remains open.
1 If you want to view the phone link you have created, press to close the List
Manager.
Renaming a phone link
When you rename a phone link, references to the phone link in the Address List are not
automatically updated; you need to go to the Address List and update any references to
the phone link.
NOTE
In the following discussion, you will need to log in as administrator to see
the Phone Link List (see page 110, Logging into admin level from user
level).
If this prompt is
displayed...
Do this...
Address? • enter the address of the phone link station, or
• leave the address empty if you want to be
prompted to choose an address when you make
the call
Network? • select the network in which you want to use this
phone link, or
• select <blank> if you want to be prompted to
select a network when you make the call
Channel/Mode? • select the channel/mode that you want to use to
make the call, or
• select <blank> if you want to be prompted to
select a channel/mode when you make the call