Reference Manual
Table Of Contents
- 10 The NETList
- 11 The Phone Link List
- 12 The Address List
- 13 Making and receiving calls
- Calls you can make and receive
- Making a call
- Listen Before Transmit Mode
- Testing the quality of a channel in a Codan Selcall network
- Replacing LQA information for all channels in an ALE/CALM network
- Making a manual sounding operation in an ALE/CALM network
- Selecting the best channel in an ALE/CALM network
- Other ways to make calls
- Calling methods
- The Calls Out Log
- Receiving a call
- The call alert
- The incoming call screen
- Error reporting in a received AMD message
- The Calls In Log
- Figure37: The Calls In Log showing a Selective call received
- Figure38: The Calls In Log showing a Message call received
- Figure39: The Calls In Log showing a Get Status call received
- Figure40: The Calls In Log showing a NET call received
- Displaying an entry in the Calls In Log
- Returning a call from the Calls In Log
- Deleting an entry from the Calls In Log
- Detecting transmissions from other stations
- 14 The Control List
- Entries in the Control List
- ALE entries
- Auto Resume entries
- Devices entry
- Figure42: The Devices entry in the Control List
- Selecting a built-in test
- Displaying the electronic serial number of a device
- Installing an option in the transceiver
- Displaying the firmware version of your transceiver
- Displaying the product name of a device
- Renaming your transceiver
- Accessing lists from the Devices entry
- GPS Screen entry
- LQA Screen entry
- Messages entry
- 15 The Keypad List
- 16 The Mode List
- 17 Using the transceiver in free tune and Amateur Mode
- 18 Hot keys
- About hot keys
- Full-time and part-time hot keys
- Assigning several macros to one key
- Automating several tasks with one macro
- Troubleshooting macros
- Storing macros
- Ideas for creating macros
- Creating a macro and assigning it to a hot key
- Copying a macro
- Moving a macro
- Renaming a macro
- Deleting a macro
- Creating a macro to perform two or more tasks
- Special macros
- 19 Operating the transceiver from a computer
- About CICS
- Using CICS
- Setting up CICS
- Terms used in CICS and the 2110SSB Transceiver
- CICS commands
- Table33: CICS commands and their functions
- alebeacon command
- alecall command
- aletelcall command
- amd command
- beacon command
- call command
- chan command
- echo command
- freq command
- gpsbeacon command
- gpsposition command
- hangup command
- help command
- lbt command
- link command
- lock command
- lqa command
- mode command
- pagecall command
- prompt command
- ptt command
- scan command
- secure command
- selbeacon command
- selcall command
- selfid command
- set command
- sideband command
- sound command
- statusack command
- statuscall command
- statustime command
- telcall command
- ver command
- Summary of command syntax
- CICS response messages
- CICS error messages
- 20 Connectors
- 21 System messages
- 22 Accessories and hardware options
- 23 Specifications
Hot keys
250 2110 SSB Transceiver Reference Manual
Table 29: Macros assigned to the Special entry in the Keypad List
Name of macro Description
Call Emergency Begins a call to the Emergency 1 entry in the Address List. If
there are other emergency entries in the list (named
Emergency 2, Emergency 3 and so on) the macro pauses for
approximately 10 seconds after the first call has ended then
begins a call to the next emergency entry.
The transceiver calls each emergency entry in sequence until
the last entry has been called or you press PTT.
Call Key Begins a call, enabling the user to enter call information when
prompted.
Call Logs - In Displays the Calls In and Calls Out logs, beginning with the
Calls In Log, then returns to the screen from which you began.
When the MIL-STD-188-141B ALE option is installed, the
Last Heard Log is displayed after the Calls Out Log.
Call Logs - Out Displays the Calls Out and Calls In logs, beginning with the
Calls Out Log, then returns to the screen from which you began.
When the MIL-STD-188-141B ALE option is installed, the
Last Heard Log is displayed after the Calls In Log.
End Call Ends a call if a call is in progress.
Mute Toggles mute on or off.
Mute Type Toggles between Selcall mute and Voice mute.
New Call Displays the new call screen with the address and call type of
the last call made.
Power Down Switches off the transceiver.
Scan Toggle Ends a call if a call is in progress, or switches scanning on or
off.
Secure Toggles Voice Encryptor on or off, if installed with special
firmware programmed and enabled in the transceiver.