Getting Started Guide
Table Of Contents
- Table of contents
- List of figures
- List of tables
- Introduction
- 1 2110SSB Transceiver compliance
- 2 Your 2110SSB Transceiver
- 3 Preparing the 2110SSB Transceiver for use
- 4 The front panel
- 5 Getting started
- 6 Troubleshooting
- Appendix A— Entering and editing text
- Appendix B— Using Quick Start
- Appendix C— Using the GPS receiver
- Appendix D— Transceiver specifications
- Appendix E— HF radio transmission
- Appendix F— Definitions
- Appendix G— Warranties
- Index
2110 SSB Transceiver Getting Started Guide 43
CODAN
6 Troubleshooting
Below is a checklist for basic troubleshooting.
Check that:
• all connectors are dry and free of dirt
• all connections are sound
• the battery is connected to the transceiver and has some
charge
• the selected antenna is appropriate for the distance over
which you want to communicate
• the antenna is deployed correctly, oriented in a suitable
direction, and connected to the transceiver
• the grounding system is adequate as per instructions
provided with the antenna
• the antenna selection icon on the front panel screen
matches the type of antenna you are using
If required, restart your transceiver to invoke self-testing. The
self-test checks the memory, hardware, LCD and keys.
If a serious fault is reported, contact your Codan
representative.
Table 5 contains some general tips for troubleshooting your
transceiver.