Getting Started Guide
Table Of Contents
- Table of contents
- List of figures
- List of tables
- Introduction
- 1 2110SSB Transceiver compliance
- 2 Your 2110SSB Transceiver
- 3 Preparing the 2110SSB Transceiver for use
- 4 The front panel
- 5 Getting started
- 6 Troubleshooting
- Appendix A— Entering and editing text
- Appendix B— Using Quick Start
- Appendix C— Using the GPS receiver
- Appendix D— Transceiver specifications
- Appendix E— HF radio transmission
- Appendix F— Definitions
- Appendix G— Warranties
- Index
Preparing the 2110 SSB Transceiver for use
20 2110 SSB Transceiver Getting Started Guide
Inserting the transceiver into a backpack
All backpacks come with adjustable straps that hold the
transceiver firmly in position. Some backpacks have an
internal mounting frame.
To insert the transceiver into a backpack with an internal
mounting frame:
1 Open the rear of the backpack to expose the mounting
frame.
1 Push the transceiver between the foam mounts on the
frame.
1 Secure the transceiver with the two adjustable straps.
1 Close the rear of the backpack.
To insert the transceiver into the soft backpack:
1 Slide the transceiver into the backpack.
1 Secure the transceiver with the adjustable strap on the
outside of the backpack.