Reference Manual
Table Of Contents
- Appendix A Hot key examples
- Example1: selecting a specific channel
- Example2: displaying an information screen
- Example3: displaying and/or changing a setting in the Control List
- Example4: changing a value to the next value in a list
- Example5: opening a list at the marker entry
- Example6: making a call using a specific entry in the Address List
- Example7: setting up one-touch discreet operation
- Appendix B Get Status calls
- Appendix C Forgotten passwords
- Appendix D Limiting user access
- Introduction
- Syntax for the Message10 entry
- Activating configuration commands in the Message10 entry
- Restricting access to the List Manager
- Restricting access to admin level
- Restricting access to call types
- Enabling the automatic removal of the incoming call pop-up
- Restricting access to holding CALL
- Restricting access to Voice Encryptor features
- Index
2110 SSB Transceiver Reference Manual 337
CODAN
Appendix C Forgotten passwords
If you have forgotten your user password, contact Codan to obtain a code to erase your
password. You will be asked to quote the ESN of the transceiver unit.
To obtain the required ESN and/or enter the code provided by Codan:
1 Switch on the transceiver then wait until you are prompted to enter a password.
1 Hold to display the Option code screen.
The ESN is displayed on the bottom line of the screen.
1 Do one of the following:
• To exit this screen and return to the Enter password screen, hold .
• To enter the code to erase your password, start typing. The transceiver
automatically enters dashes in the appropriate places. When you have entered
the code, press . The password is erased and the home screen is displayed.
NOTE The ESN is displayed in a similar manner during Admin login.
NOTE
To enter a new password, use the Password User or Password Admin
entry in the Control List (for help see page 96, Changing a setting in the
Control List).