Reference Manual

Operating the transceiver
84 2110 SSB Transceiver Reference Manual
Setting up the voice encryptor
Setting the Corporate key in an index
To set the Corporate key:
1 Press until Main Menu is displayed.
1 Scroll to Control, then press .
1 Scroll to Secure Key, then hold .
1 Enter an 8-digit key that will be used for your organisation, then press .
1 Scroll to Index, then hold .
1 Scroll to Index 1, then press .
1 Press until Main Menu is displayed.
Setting up the voice encryptor for basic security use
To set up the voice encryptor:
1 Set up the Corporate key, if required (see above Setting the Corporate key in an
index).
1 Scroll to Control, then press .
1 Scroll to Secure Mode, then hold .
1 Scroll to Corporate, then press .
1 Lock and hide the Secure Mode entry in the Control List (see page 115, Locking and
unlocking information and page 113, Hiding and showing information).
1 If you want your users to be able to use a PIN, enable the PIN mode (see page 344,
Restricting access to Voice Encryptor features). Otherwise, disable the PIN mode.
NOTE
In the following discussion, you will need to log in as administrator to see
the entries in the Control List (see page 110, Logging into admin level
from user level).
NOTE
Scroll to the entry or use the Find feature (for help see page 64,
Finding words and values).
NOTE
If you need to program Index 2 or above with a secure key, you must
use CICS (see page 278, secure command).
NOTE
Scroll to the entry or use the Find feature (for help see page 64,
Finding words and values).