Reference Manual
Table Of Contents
- Table of contents
- 1 About this manual
- 2 2110SSB Transceiver compliance
- 3 HF radio transmission
- 4 The 2110SSB Transceiver
- 5 Preparing the 2110SSB Transceiver for use
- 6 Operating the transceiver
- 7 Using lists
- 8 The Channel List
- 9 The Network List
- 10 The NETList
- 11 The Phone Link List
- 12 The Address List
- 13 Making and receiving calls
- 14 The Control List
- 15 The Keypad List
- 16 The Mode List
- 17 Using the transceiver in free tune and Amateur Mode
- 18 Hot keys
- 19 Operating the transceiver from a computer
- 20 Connectors
- 21 System messages
- 22 Accessories and hardware options
- 23 Specifications
- Index
- List of figures
- List of tables
- 1 About this manual
- 2 2110SSB Transceiver compliance
- 3 HF radio transmission
- 4 The 2110SSB Transceiver
- 5 Preparing the 2110SSB Transceiver for use
- Charging a battery
- Connecting a battery to the transceiver
- Inserting the transceiver into a backpack
- Selecting an appropriate antenna
- Troubleshooting the transceiver
- Testing the installation
- 6 Operating the transceiver
- Switching on the transceiver
- The front panel screen
- The channel screen
- Entering and editing text
- Quick Start
- Muting the transceiver
- Scanning channels
- Using the microphone
- Finding words and values
- Setting the basics
- Using hot keys
- Tuning the antenna
- Using the clarifier
- Reducing background noise with Easitalk
- Using the voice encryptor
- 7 Using lists
- The Main Menu
- Selecting a list
- The List Manager
- Setting a marker
- Setting the home screen
- Changing a setting in the Control List
- Making changes to all other lists
- Hiding and showing settings
- Grouping and ungrouping entries
- Restricting access to information
- Logging into admin level
- Displaying full and normal view
- Hiding and showing information
- Locking and unlocking information
- 8 The Channel List
- 9 The Network List
Operating the transceiver
2110 SSB Transceiver Reference Manual 67
Setting the basics
Setting the time and date
When the transceiver leaves the factory it is set to UTC time with a time zone offset of
zero. To set your local time and date you need to enter your time zone offset from UTC
time, then adjust the local time and date if necessary. This feature is useful if you have a
network that spreads over several time zones, or you need to time stamp your
transmissions according to the current time at longitude zero.
Setting the time zone offset
To set your time zone offset from UTC time:
1 Press until Main Menu is displayed.
1 Scroll to Control, then press .
1 Scroll to Time Zone Offset, then hold .
1 Scroll to the correct time zone offset for your location, then press .
1 Press until Main Menu is displayed.
NOTE
In the following discussion, you will need to log in as administrator to see
the Main Menu (see page 110, Logging into admin level from user level).
NOTE
Scroll to the entry or use the Find feature (for help see page 64,
Finding words and values).