Reference Manual
Table Of Contents
- Table of contents
- 1 About this manual
- 2 2110SSB Transceiver compliance
- 3 HF radio transmission
- 4 The 2110SSB Transceiver
- 5 Preparing the 2110SSB Transceiver for use
- 6 Operating the transceiver
- 7 Using lists
- 8 The Channel List
- 9 The Network List
- 10 The NETList
- 11 The Phone Link List
- 12 The Address List
- 13 Making and receiving calls
- 14 The Control List
- 15 The Keypad List
- 16 The Mode List
- 17 Using the transceiver in free tune and Amateur Mode
- 18 Hot keys
- 19 Operating the transceiver from a computer
- 20 Connectors
- 21 System messages
- 22 Accessories and hardware options
- 23 Specifications
- Index
- List of figures
- List of tables
- 1 About this manual
- 2 2110SSB Transceiver compliance
- 3 HF radio transmission
- 4 The 2110SSB Transceiver
- 5 Preparing the 2110SSB Transceiver for use
- Charging a battery
- Connecting a battery to the transceiver
- Inserting the transceiver into a backpack
- Selecting an appropriate antenna
- Troubleshooting the transceiver
- Testing the installation
- 6 Operating the transceiver
- Switching on the transceiver
- The front panel screen
- The channel screen
- Entering and editing text
- Quick Start
- Muting the transceiver
- Scanning channels
- Using the microphone
- Finding words and values
- Setting the basics
- Using hot keys
- Tuning the antenna
- Using the clarifier
- Reducing background noise with Easitalk
- Using the voice encryptor
- 7 Using lists
- The Main Menu
- Selecting a list
- The List Manager
- Setting a marker
- Setting the home screen
- Changing a setting in the Control List
- Making changes to all other lists
- Hiding and showing settings
- Grouping and ungrouping entries
- Restricting access to information
- Logging into admin level
- Displaying full and normal view
- Hiding and showing information
- Locking and unlocking information
- 8 The Channel List
- 9 The Network List
Operating the transceiver
2110 SSB Transceiver Reference Manual 51
External power supply indicator
If you supply 12 V DC power to your transceiver via the 6-way connector on the base of
the unit, the battery status indicator is replaced by the external power supply indicator.
Figure 12: External power supply indicator
The indicator shows the voltage supplied by the power source. The scale of the indicator
is 10–15 V. In the example above, the voltage is just below 13 V.
Selecting a channel
To select a channel:
1 Press or VIEW until the channel screen is displayed.
1 If the transceiver is scanning, press SCAN to switch off scanning.
1 Scroll through the channels in the list. Stop scrolling when the channel you want is
displayed.
The channel is selected.
NOTE
If you want to change the sideband or IF filter settings, press MODE.
If the mode does not change there is only one mode for the channel.
You can also use the Find feature to find a channel (see page 64,
Finding words and values).
If you have an automatic antenna fitted, press PTT to tune the antenna
to the currently selected channel.
external power supply indicator