Reference Manual

The Network List
128 2110 SSB Transceiver Reference Manual
Programming the Network List
Creating a network
When you create a network, the transceiver prompts you for various details. It is
recommended that you read page 123, Settings in the Network List before you create a
network.
To create a network:
1 Press until Main Menu is displayed.
1 Scroll to Network, then press .
1 Use the List Manager to create an entry (for help see page 97, Creating an entry in a
list and page 52, Entering and editing text).
1 Enter the setting information provided in the following table as required, then
press to enter the information.
NOTE
In the following discussion, you will need to log in as administrator to see
the Network List (see page 110, Logging into admin level from user level).
If this prompt is
displayed...
Do this...
Scan Network? • select whether the network is scanned or not
NOTE
If you want to scan a voice network for
voice when the Mute Type is set to Selcall,
select Scan voice (see page 61, Muting the
transceiver).
Call System? • select the call system you want to use
Call Detect Time? • increase or decrease the call detect time, or
• scroll to the far left of the line until <default> is
displayed
Sounding Interval? • select the value you want to use
Privacy Mode? • select the mode you want to use
Privacy Password? • enter the password you want to use with the
Privacy Mode
Nominal Preamble? • increase or decrease the nominal preamble time
Channel? • select the channel you want to use
NOTE
If the channel is in a group, select the group
name then press , then select the channel
that you want to use.
If you want to use a group of channels,
select the group name, then hold .