Reference Manual
Table Of Contents
- Table of contents
- 1 About this manual
- 2 2110SSB Transceiver compliance
- 3 HF radio transmission
- 4 The 2110SSB Transceiver
- 5 Preparing the 2110SSB Transceiver for use
- 6 Operating the transceiver
- 7 Using lists
- 8 The Channel List
- 9 The Network List
- 10 The NETList
- 11 The Phone Link List
- 12 The Address List
- 13 Making and receiving calls
- 14 The Control List
- 15 The Keypad List
- 16 The Mode List
- 17 Using the transceiver in free tune and Amateur Mode
- 18 Hot keys
- 19 Operating the transceiver from a computer
- 20 Connectors
- 21 System messages
- 22 Accessories and hardware options
- 23 Specifications
- Index
- List of figures
- List of tables
- 1 About this manual
- 2 2110SSB Transceiver compliance
- 3 HF radio transmission
- 4 The 2110SSB Transceiver
- 5 Preparing the 2110SSB Transceiver for use
- Charging a battery
- Connecting a battery to the transceiver
- Inserting the transceiver into a backpack
- Selecting an appropriate antenna
- Troubleshooting the transceiver
- Testing the installation
- 6 Operating the transceiver
- Switching on the transceiver
- The front panel screen
- The channel screen
- Entering and editing text
- Quick Start
- Muting the transceiver
- Scanning channels
- Using the microphone
- Finding words and values
- Setting the basics
- Using hot keys
- Tuning the antenna
- Using the clarifier
- Reducing background noise with Easitalk
- Using the voice encryptor
- 7 Using lists
- The Main Menu
- Selecting a list
- The List Manager
- Setting a marker
- Setting the home screen
- Changing a setting in the Control List
- Making changes to all other lists
- Hiding and showing settings
- Grouping and ungrouping entries
- Restricting access to information
- Logging into admin level
- Displaying full and normal view
- Hiding and showing information
- Locking and unlocking information
- 8 The Channel List
- 9 The Network List
The Network List
122 2110 SSB Transceiver Reference Manual
About networks
A network is two or more stations that use the same frequencies and call system to
communicate. This simplifies communication because each station knows the method
with which they can make and scan for incoming calls, and the frequencies they can use.
Information about the networks you may use is stored in the Network List.
Networks are based on call systems. A call system is a method of making and receiving
calls. For example, if you are in a network that uses the Codan Selcall call system, you
can make calls by entering the address of the station you want to call, then selecting the
channel/mode you want to use. When your call is detected by the receiving station, that
station rings to alert the operator. In an ALE/CALM network, you can make calls by
entering the address of the station you want to call only. The transceiver will select the
best channel on which to make the call.
When you create a network, the transceiver prompts you to select a call system, then
prompts you for further information based on your selection. Figure 27 shows an
example of the information required to create networks based on the Codan Selcall,
ALE/CALM, and Voice Only call systems. This information is explained on page 123,
Settings in the Network List.
Figure 27: An example of information stored in the Network List
NOTE
The call systems from which you can select depend on the options
installed in the transceiver.
Network List
Network B Scan Network:
Call System:
Call Detect Time:
Privacy Mode:
Privacy Password:
Nominal Preamble:
Channel/Mode:
Scan
ALE/CALM
<default>
Group
2 seconds
Chan 1/USB
Chan 2/USB
Chan 3/USB
******
Sounding Interval: 2.5 hours
Chan 4/LSB
Network A Scan Network:
Call System:
Call Detect Time:
Privacy Mode:
Privacy Password:
Nominal Preamble:
Channel/Mode:
Scan voice
Codan Selcall
<default>
Registered
******
4 seconds
Chan 3/USB
Chan 4/LSB
Chan 5/USB
Network C Scan Network:
Call System:
Call Detect Time:
Channel/Mode:
Dont Scan
Voice Only
<default>
Chan 1/USB
Chan 2/LSB